Super Acrilic Emulsion Paint

Acrylic emulsion paint is formulated to produce a flat paint strokes, doff and produce brilliant color and the color does not fade for interior and exterior use.
PURPOSE: Can be used for a variety of wall and ceiling painting the interior and exterior such as stucco , concrete , triplex , gypsum and asbestos.

Technical Data :
Type : Styrene acrylic copolymer emulsion
Gloss : ( Doff )
Color : See color card
Density : 1.40 - 1.60 Kg / Liter
Theoretical dispersive power : 11 m² / liter for dry coating thickness of 30 microns
Speed drying : Dry surface : 15-30 minutes ( Depending on humidity ) painting time interval of at least 2 hours , preferably one night to get the results okay.

HOW TO USE:
Brush or roller : For the first layer dilute 10-20 % with clean water For the second and subsequent layers of 5 % - 10 %
Syringe : Dilute with water 10-15 %

SURFACE PREPARATION
1. The new walls of stucco or concrete - The surface of the wall must be perfectly dry. Water levels have reached 14-18 % and alkali below pH 9 - Clean up of dirt, dust , oils and salts - Wash with a solution of chloride acid 10-15 % and then rinse with clean water. - If necessary, wash again with a chlorine solution of 10-15 % to get rid of mold or mildew. Once the surface is dry again, give 1 layer Wall Sealer or alkali resisting primer.
2. The wall that had been painted - If the old paint adhesion was good, clean from dirt , dust and oil. If necessary use a detergent solution and then rinsed with water until clean. - When it is moldy or mossy, wash with chlorine 10-15 % , then rinsed with clean water and dry after given Fungicidal solution. - When the layers of old paint had chipped, should be scraped down to the base wall. Clean wall surface with clean water and then dry.

Additional Information:
Diluent : Water Size Packaging : Pail ( 22 Kg ) , Gallon ( 4.5 Kg ) Storage : Store in a shady and humid